Bale Band V 2.2 Review

: Place the new spool; this is recommended as a two-person operation .

: Set the strapping quantity to "1" on the iBand-It App and run the machine until it indicates it is out of strapping at Position 0.

: Bales are sequentially loaded into the stacking chamber. Bale Band v 2.2

: Thread the strap through the rod and spring-loaded guide. It must pass between the upper crimp roller and lower bearing.

: The back gates open, and the bundle exits the machine while the cycle resets. Operator's Manual - Bale Band-It : Place the new spool; this is recommended

: Use the red-handled clamp to secure the strap. Do not adjust this clamp while the hydraulic power is off, as it can damage the assembly. Monitoring & Maintenance

: The hydraulic return line must be connected directly to the tractor's tank to ensure zero back pressure , which is the most common cause of Strap Guide Arm failures. Threading Steel Strapping Correct threading is vital for consistent bundling. : Thread the strap through the rod and spring-loaded guide

: Keep hydraulic systems clean and repair leaks immediately to prevent contamination. Standard Sequence of Events